Test
Section |
Sub
Section |
Detail |
|
run-log |
log |
17:34:14: Fragmented scan: requested |
|
|
|
17:34:14: IP address: ###.###.###.### |
|
|
|
17:34:14: Pings-of-death: requested |
|
|
|
17:34:14: Testing level: standard |
|
|
|
17:34:14: doing basic ICMP ping |
|
|
|
17:34:28: Running tcp SYN (half-open) portscan,
source port 20, over 1-1024 plus 1026 common tcp service ports. |
|
|
|
18:04:29: ** Last phase failed due to a sub-command
timeout. |
|
|
|
18:04:29: ** test results from this phase may
not be reliable. |
|
|
|
18:04:29: Running tcp SYN (half-open) portscan,
source port 20, over first 140 ports. |
|
|
|
18:04:29: using fragmented packets, which can
get past some firewalls |
|
|
|
18:19:30: ** Last phase failed due to a sub-command
timeout. |
|
|
|
18:19:30: ** test results from this phase may
not be reliable. |
|
|
|
18:19:30: Running quick udp portscan over port
1-16 |
|
|
|
18:20:06: Running tcp FULL CONNECT portscan over
1-1024 plus services (limit 15 minutes). |
|
|
|
18:30:06: Attack with targa. |
|
|
|
18:30:06: Sending each different ping-of-death.. |
|
|
|
18:30:12: Done Attack with targa. |
|
|
|
18:30:13: Attack with sping. |
|
|
|
18:30:13: Done Attack with sping. |
|
|
|
18:30:14: Attack with fawx. |
|
|
|
18:30:14: Done Attack with fawx. |
|
|
|
18:30:15: Attack with kod. |
|
|
|
18:31:46: Done Attack with kod. |
 |
|
icmp |
comment |
if your security logs are good, you might have
logged a ping. |
|
|
result |
Your address is currently NOT pingable. |
|
|
|
udp |
comment |
since all UDP ports are silent, there is no information. |
|
|
result |
Nothing can be determined about your UDP ports. |
|
|
|
target IP is silent, or throttling speed of UDP
icmp return packets |
|
|
|
udp port scan would take too long! full udp scan
cancelled. |
|
|
|
smtphealth |
result |
Cannot do requested SMTP server health check because I dont see port 25 open |
|
|
|
nmap-syn |
comment |
No results from the SYN (stealth) scan) |
|
|
|
nmap-synfrag |
comment |
fragmented packet scans are network intensive,
so only first 140 ports are tried since if your firewall blocks services, it would
certainly be trying to block something in this range. |
|
|
|
nmap-tcp |
comment |
No results from the basic TCP scan |
|
|
|
nmap-syn |
comment |
If your security is good, you get an alert of
a scan attempt but this is a stealth scan, so it is difficult to detect. |
|
|
|
nmap-synfrag |
comment |
No results from the FRAGMENTED PACKET scan |
|
|
|
nmap-udp |
comment |
UDP Ports. Could not complete UDP scan because
within the timeout allowed, we got no responses. It is probably you have an effective
UDP firewall. |
|
|
|
final |
comment |
Conclusion: FINAL SCORE: 0 |
|
|
|
** best result (I got no reaction at all from this IP) |
MidPoint Firewall Test
Menu:
